应特格ENTEGRIS气体过滤器，WGMXMBSS2现货供应！-无锡远路贸易有限公司官网

行业新闻
联系我们

无锡远路贸易有限公司

咨询热线：0510-88710854

邮箱：yuanlu.company@163.com

网址：http://www.yuanlutrade.com

公司新闻

网站首页 > 公司新闻

您的位置：

应特格ENTEGRIS气体过滤器，WGMXMBSS2现货供应！

发布日期：2025-02-05 16:02:12

应特格ENTEGRIS气体过滤器，WGMXMBSS2现货供应！

APPLICATIONSWafergard® MAX In-line PTFE Gas Filters Applications

Compatible with all classes of semiconductor process gases
Compatible with general nitrogen and CDA applications

SPECIFICATIONS

Drawings

Performance Data

Product Specifications

Materials	Filter element	Hydrophobic PTFE membrane supported by molded PFA structures
	Housing	Electropolished low sulfur 316L stainless housing
Downstream cleanliness	Particles	Less than 0.03 particles/liter (<1 particle/ft3) greater than 0.01 μm
	Volatiles (Silver)	<10 ppb H2O and O2. Below LDL THC (lower detection limit is 5 ppb)
Removal rating	≥0.0015 μm
Surface finish interior	WGMX (Bronze) MB XXXX	≤20 μin Ra
	WGMX (Silver/Bronze Plus) MS XXX/XXX	≤7 μin Ra
Helium leak rating	Qualified	2 x 10-10 atm-cc/sec
	Tested	1 x 10-9 atm-cc/sec
Operating conditions	Maximum inlet pressure	Silver and Bronze Plus 1⁄4" and 1⁄2" VCR® compatible fittings: 7.0 MPa (70 bar, 1015 psig)
		Bronze 1⁄4" and 1⁄2" VCR compatible fittings: 6.0 MPa (60 bar, 870 psig)
		Bronze and Bronze Plus 1⁄4", 3⁄8" and 1⁄2" Swagelok® compatible fitting: 6.0 MPa (60 bar, 870 psig)
	Maximum forward differential pressure	7 bar (102 psid)
	Maximum reverse differential pressure	2.5 bar (36 psid)
	Maximum operating temperature	120°C (248°F)
Flow rating	Refer to performance data
Warranty	Bronze	1 year
	Silver	3 years
Particle retention	Greater than 99.9999999% (9 LRV) removal of all particles (referenced at the most penetrating particle size)

Wafergard

MAX In-line PTFE Gas Filters
SLIDE DETAILS.

Download Image
These in-line PTFE gas filters are compatible with high-purity gases and provide superior particulate filtration in ultrapure gas applications as well as general nitrogen and CDA applications.
PTFE filter element excels in ultrapure applications
Designed for high-flow and low-delta pressure applications
For use with inert and reactive gases, including ozone
Pre-conditioned for fast startup (silver only)
PART NUMBERS
Wafergard

MAX In-line PTFE Gas Filters Part Numbers
PART NUMBER FITTING SIZE AND TYPE LENGTH
WGMXMBPRF2 1/4" male VCR

inlet, 1/4" female VCR

outlet 141.2 mm (5.6")
WGMXMBRR2 1/4" male VCR

127 mm (5.00")
WGMXMBRR4 1/2" male VCR

127 mm (5.00")
WGMXMBSS2 1/4" Swagelok

112.7 mm (4.44")
WGMXMBSS3 3/8" Swagelok

117.9 mm (4.64)
WGMXMBSS4 1/2" Swagelok

118.7 mm (4.67")
WGMXMPRR2 1/4" male VCR

127 mm (5.00")
WGMXMPRR4 1/2" male VCR

127 mm (5.00")
WGMXMPSS2 1/4" Swagelok

112.7 mm (4.44")
WGMXMPSS3 3/8" Swagelok

117.9 mm (4.64)
WGMXMSBW2 1/4" Butt weld tube 133.4 mm (5.25")
WGMXMSBW3 3/8" butt weld tube 133.4 mm (5.25")
WGMXMSBW4 1/2" Butt weld tube 133.4 mm (5.25")
WGMXMSRR2 1/4" male VCR

127 mm (5.00")
WGMXMSRR4 1/2" male VCR

127 mm (5.00")

分享到：

上一篇：英特格ENTEGRIS，WG2F40RR3已经停产，替代...下一篇：Honeywell Midas Gas Detector气体探测器主...